Concrete Patios in Tulare, CA

Concrete patio slab in a backyard lawn

Patio Concrete Services by Valley Ridge Concrete

A well-built concrete patio is the start of real outdoor living in the valley: a flat, cool, easy-to-clean space for a table, a grill, a shade cover and the family.

We build new backyard patios, extend small builder-grade slabs, pour pads for patio covers and pergolas, and add side-yard slabs for trash cans, hot tubs and equipment. Most patios we pour are finished in a single day, with forms out and cleanup done before we leave.

Good patios are about drainage as much as concrete. We slope every patio at least 1/8 inch per foot away from the house, keep the top of slab below weep screed and door thresholds, and plan around sprinklers so lawn water does not pond against your stucco. If a patio cover is coming later, we thicken the slab or add footings where the posts will land.

Finish options include a classic broom finish, a smooth trowel finish for covered areas, a light salt finish that stays cooler underfoot, exposed aggregate, and stamped or colored concrete. We can also add seat walls, steps and a separate grill pad in the same pour.

Patio Concrete Prices in Tulare, CA (2026)

Typical cost: Standard broom-finish patios in Tulare usually cost $8 to $12 per square foot; decorative finishes and stamped patios cost more.

Patio Concrete price list, installed prices in Tulare County, updated October 2026
WorkUnitPrice range
Broom-finish patio, 4" with rebarper sq ft$8 - $11per sq ft
Smooth trowel patio for covered areasper sq ft$9 - $12per sq ft
Salt finish or integral color patioper sq ft$10 - $14per sq ft
Exposed aggregate patioper sq ft$11 - $15per sq ft
Patio extension doweled to existing slabper sq ft$9 - $13per sq ft
Post footing for a patio cover or pergolaeach$150 - $350each
Hot tub, AC or shed padper pad$900 - $2,200per pad
Removal and haul-off of old patioper sq ft$2 - $4per sq ft

What is included: Prices include sod and soil removal up to 4 inches, compacted base, forms, #3 rebar, 3,000-3,500 PSI concrete, finishing, saw-cut joints and cleanup.

Ranges reflect typical residential jobs in Tulare, Visalia, Hanford and Porterville. Size, access, demolition, thickness and finish move the price within the range. Every estimate is free and in writing: request yours or call (559) 555-0163. Compare all services on our concrete pricing guide.

Our Patio Concrete Process

Patio extension formed along a stucco home 01

Plan & Layout

We measure, mark the patio shape and slope, and plan for covers, sprinklers and drainage.

Fresh patio slab inside wood forms 02

Grade & Form

Sod and soil are removed, base is compacted, forms and rebar are set.

Patio slab with fence going in behind it 03

Pour & Finish

Concrete is poured, finished to your chosen texture, jointed and cured.

Designing a Patio for Central Valley Summers

Lighter colors and textured finishes stay noticeably cooler than dark, smooth concrete in August. Many Tulare homeowners pair a broom-finish patio with a solid or lattice cover, or choose a salt finish in a buff color for barefoot areas. If you are planning an outdoor kitchen, we sleeve for gas and electric lines before the pour so nothing has to be cut out later.

Patio Extensions and Add-Ons

A lot of the patios we pour start with a small 8-by-10 builder slab. We dowel new concrete into the old slab so the two move together, match the elevation and finish as closely as possible, and use a clean saw-cut joint where they meet. Steps, landings and walkways to the side gate can be poured the same day.

New Backyard Patios

Full patios with broom, smooth, salt or exposed aggregate finishes.

Patio Extensions

Doweled additions that enlarge an existing builder slab.

Patio Cover Slabs

Thickened slabs and post footings for covers and pergolas.

Pads & Side Yards

Hot tub, shed, AC and trash can pads and side-yard slabs.

What Customers Say About Our Patio Concrete

Backyard patio by Valley Ridge Concrete in Visalia

Jennifer F.

Backyard patio · Visalia, CA

“They poured our patio at 5:30 in the morning to beat the July heat, and the crew lead explained every control joint before they cut it. Clean job site, fair price, and the slab drains away from the house exactly like they promised.”

Pool deck by Valley Ridge Concrete in Lindsay

John A.

Pool deck · Lindsay, CA

“Broom finish around the pool is cool on bare feet and not slippery. They worked around our pool builder's schedule without any finger-pointing. Would hire again.”

Patio Concrete FAQ

Most broom-finish concrete patios cost $8 to $12 per square foot installed. A 400-square-foot patio typically falls between $3,200 and $4,800 depending on access, demolition and thickness.

You can walk on it after 24 hours and put patio furniture on it after about three days. Wait seven days before heavy items like a hot tub or a loaded smoker.

A simple on-grade patio usually does not need a permit, but a patio cover, outdoor kitchen or work near property lines may. We will tell you what your city or the county requires.

Yes. We drill and epoxy rebar dowels into the existing slab so the new section stays level with it, then finish and joint the new concrete to match.

We also install stamped concrete, stained concrete, concrete foundation, concrete walkway, concrete driveway throughout Tulare, Visalia, Hanford, Porterville, Lindsay, Exeter and the rest of Tulare County.

patio concrete in tulare

Ready for New Patio Concrete?