Concrete Walkways in Tulare, CA

Long curved concrete walkway on a large lot

Concrete Walkway Services by Valley Ridge Concrete

A good walkway guides people to your front door, keeps mud out of the house and makes the side yard usable. We form straight, curved and stepped walkways that drain right and stay level.

We pour front entry walks, curved garden paths, side-yard walkways to the trash cans and gate, paths to backyard sheds and casitas, and public sidewalk sections when the city issues a repair notice. Standard residential walks are 4 inches thick with rebar or welded wire, 36 to 48 inches wide, and sloped slightly to one side so water runs off.

Tree roots are the most common reason walkways in Tulare and Visalia heave. When we replace a lifted walk we cut roots back where an arborist says it is safe, install a root barrier, and add steel so the new section resists lifting. For trip hazards on otherwise good concrete, we can sometimes replace a single panel instead of the entire run.

Curves are where walkways get interesting. We lay out curved paths with flexible forms and spray paint so you can see and walk the shape before we commit, and we finish them with a tooled edge and a clean broom texture or a decorative border.

Concrete Walkway Prices in Tulare, CA (2026)

Typical cost: Most concrete walkways cost $9 to $14 per square foot installed; curves, steps and decorative borders add to the price.

Concrete Walkway price list, installed prices in Tulare County, updated October 2026
WorkUnitPrice range
Straight broom-finish walkway, 4"per sq ft$9 - $12per sq ft
Curved walkway or garden pathper sq ft$11 - $14per sq ft
Exposed aggregate walkwayper sq ft$12 - $15per sq ft
Stamped or colored walkway borderper linear ft$12 - $20per linear ft
Single sidewalk panel replacementper panel$450 - $850per panel
City sidewalk repair to city standardsper sq ft$13 - $18per sq ft
Root barrier installationper linear ft$10 - $18per linear ft
Formed concrete steps on a sloped walkper step$180 - $350per step

What is included: Prices include removal of sod, forms, base, rebar or wire, 3,000 PSI concrete, tooled edges, joints and cleanup. City encroachment permit fees are billed at cost.

Ranges reflect typical residential jobs in Tulare, Visalia, Hanford and Porterville. Size, access, demolition, thickness and finish move the price within the range. Every estimate is free and in writing: request yours or call (559) 555-0163. Compare all services on our concrete pricing guide.

Our Concrete Walkway Process

Walkway forms and base ready for concrete 01

Layout & Removal

We mark the path, remove old concrete or sod, and check slope and drainage.

New concrete walkway connecting to a driveway 02

Forms & Reinforcement

Straight or curved forms are set to grade with rebar or wire mesh.

Side yard concrete walkway along a house 03

Pour & Edge

Concrete is poured, edged, jointed and finished, then forms are pulled.

Walkway Finishes and Borders

A medium broom finish is the safest option for front walks that get wet from sprinklers. For more curb appeal, we add a stamped or colored border, a smooth trowel band along the edges, or an exposed aggregate center. Steps along a sloped walk get a consistent rise so no one trips, and we can pour footings for handrails at the same time.

City Sidewalk Repair Notices

If the City of Tulare or Visalia has sent you a sidewalk repair notice, we can handle the permit, replace the damaged panels to city standards and meet the inspector. We match the existing sidewalk width and score pattern so the repair looks like it belongs there.

Front Entry Walks

Straight or curved walks from driveway to front door.

Garden & Side Paths

Curved garden paths and side-yard walks to gates and sheds.

Sidewalk Replacement

Removal of lifted panels and city-standard replacement.

Steps & Landings

Formed steps, landings and handrail footings on sloped walks.

What Customers Say About Our Concrete Walkway

Front walkway by Valley Ridge Concrete in Exeter

Irene S.

Front walkway · Exeter, CA

“We wanted a curved walkway that didn't look like a sidewalk. They laid out three options with paint on the lawn so we could see them before forming. Friendly crew and they left the yard cleaner than they found it.”

Stamped patio by Valley Ridge Concrete in Tulare

Hector A.

Stamped patio · Tulare, CA

“We were nervous about stamped concrete because the neighbor's patio faded in two summers. Valley Ridge showed us sealed samples, explained the color hardener and came back after 30 days to seal it again. Two years later it still looks new.”

Concrete Walkway FAQ

We recommend 42 to 48 inches for a front walk so two people can walk side by side. Side-yard and garden paths can be 30 to 36 inches.

Often, yes. If the surrounding concrete is sound we saw-cut and replace only the lifted panel, dowel it into the neighbors and address the root that caused it.

A typical 4-foot-wide, 40-foot-long front walk costs roughly $1,500 to $2,300. Removal of old concrete, curves and decorative borders add to that.

Yes. We pull encroachment permits for sidewalk work in the public right-of-way and build to the city's standard details.

We also install stamped concrete, stained concrete, concrete foundation, patio concrete, concrete driveway throughout Tulare, Visalia, Hanford, Porterville, Lindsay, Exeter and the rest of Tulare County.

concrete walkway in tulare

Ready for New Concrete Walkway?